Pool Table Installation

Temecula Valley Billiards can install any brand of pool table! Over the years, we have seen them all. If you have a pool table you would like to have installed by a professional, we have installed a table just like it. 

Any movement of the slates can break the seam line seal and create a slate ridge which can be very easily detected through your felt and affect play. The installer must secure the slate pieces firmly, and in 1 flat plane. 

Some well-built tables make this job easier than others, but all tables put up a fight. Knowing how to adjust each table to best support the slate alignment is a skill that only comes with experience.

When we install your pool table we use genuine beeswax to seal the seams between each piece of slate. Over the years we have developed a resin/wax blend that we mix ourselves, which balances the flexibility of wax with the hardness of resin and creates a perfect seam sealer. This creates a glass-like surface over the seams ensuring you will feel no transition whatsoever between the 2 pieces.

If the table is going to be in a room that might become hotter than 130 degrees however, as might happen in a garage in a desert setting, than putty is the preferred seam sealer. Every installation is different. That is why our many years of experience are so valuable.